Accessories for separation and filtration systems

As a replacement set the level switch consists of the housing and the rod with the 110 mm floating ball. If a connection cable is required, this can be ordered additionally in 3 lengths. The level switch type 07 has 3 switching points for pump control and level monitoring.

1
Level switch 07 (3 contact points)

T18-007-000

As a replacement set the level switch consists of the housing and the rod with the 110 mm floating ball. If a connection cable is required, this can be ordered additionally in 3 lengths. The level switch type 08 has 2 switching points for pump control and level monitoring.

1
Level switch 08 (2 contact points)

T18-008-000

As a replacement set the level switch consists of the housing and the rod with the 110 mm floating ball. If a connection cable is required, this can be ordered additionally in 3 lengths. The level switch type 04 has 1 switching point for level monitoring.

1
Level switch 04 (1 contact point)

T18-004-000

Cable 4x0.34 mm² with M12 angle connector. 1.5 m. Can be used for level switch types 04, 07 and 08.

1
1,5 m cable for level switch

L17-18-002

Cable 4x0.34 mm² with M12 angle connector. 5 m. Can be used for level switch types 04, 07 and 08.

1
5 m cable for level switch

L17-18-001

Cable 4x0.34 mm² with M12 angle connector. 10 m. Can be used for level switch types 04, 07 and 08.

1
10 m cable for level switch

L17-18-003

BELKI's magnetic tank cleaner is used when magnetic particles need to be quickly and easily removed from the bottom of a machine tank. The tank cleaner is designed to be easily cleaned off with the included scraper.

1
Magnetic tank cleaner with scraper

T64-002-500

The magnetic column is used as a pre-filter for the oil separator when fine magnetic particles, for example in cast iron machining, can clog the suction system and the oil separator. The magnetic column is positioned in front of the suction cup and the magnetic particles are retained by the magnetic column and the oil separator is protected from contamination.

1
Magnet column as pre-filter

T22-100-000

The paper guard for the clean side is an option for a BELKI compact filter type 4,5,60. The paper guard signals an alarm, when the roll with the clean filter paper on the filter is empty and needs to be replaced.

1
Paper guard clean side - compact filter 4,5.60

T779-4560-000

The paper guard for the clean side is an option for a BELKI deep bed band filter type 5.10-12.20 and a BELKI paper belt filter type 6.07-13.50HD. The paper guard signals an alarm, when the roll with the clean filter paper on the filter is empty and needs to be replaced.

1
Paper guard clean side - deep bed band filter and paper belt filter

T779-000-000

The paper guard for dirty side is an option for a BELKI compact filter type 4,5,60. The paper guard signals an alarm, when the roll with the used filter paper on the filter is full and needs to be replaced.

1
Paper guard dirty side - compact filter 4,5.60

T60-020-202

The paper guard for the dirty side is an option for a BELKI deep bed band filter type 5.10-12.20. The paper guard signals an alarm, when the roll with the used filter paper on the filter is full and needs to be replaced.

1
Paper guard dirty side - deep bed band filter

T72-1220-240

Your message has been sent successfully.

There was a problem validating the form. Please retry or contact the site administrator.

You must enter a valid e-mail address.
You must enter a message.