Application of a BELKI Smart Unit

The BELKI Smart Unit is used to separate particles and tramp oil from process fluids - primarily cooling lubricants. It is a mobile unit that can be easily moved between the individual machine tools. Due to its slim design and the low demands on the electrical supply, this unit is suitable for almost any metal working work shop.

Operation of a BELKI Smart Unit

The process fluid is skimmed off by one of the skimming devices of the BELKI Smart Unit, or with a suction device to filter the bottom of the machine sump. The particles are separated via the deep bed filter, the tramp oil is separated via the integrated oil separator. Even the finest ferritic particles can be retained by the optional magnetic filter. The separated oil is stored in an inner tank, the particle load is fed into a sludge box and the used filter paper is automatically wound up. The cleaned emulsion is returned to the machine sump.


Advantages of a BELKI Smart Unit

  • Oil separation and filtration in one operation
  • Highly mobile and easily adjustable for optimum results
  • Power connection via 230 V / 50 Hz connection
  • Robust pump for chips up to approx. 4 mm
  • An optional magnetic filter ensures that even very fine particles can be filtered out of the emulsion.
  • A very effective oil separator increases the lifetime of the emulsion

How can we help you?

Do you need a compact and mobile device that can filter particles and tramp oil? Or are you in doubt about which suction device to use for the BELKI Smart Unit? So do not hesitate to contact our competent team, who are always ready to answer your questions and guide you.

Working principle of the BELKI Smart Unit


BELKI Smart Unit

BELKI Smart Unit is our solution for simpel and effective cleaning of coolant in machine tanks. As mobile by-pass technology, the BELKI Smart Unit offers both effective particle filtration (optional ultra-fine filtration with magnetic filter) and oil separation. The BELKI Smart Unit cleans during operation, without interrupting the production.

1
BELKI Smart Unit - Front

T341-2560-003

BELKI Smart Unit is our solution for simpel and effective cleaning of coolant in machine tanks. As mobile by-pass technology, the BELKI Smart Unit offers both effective particle filtration (optional ultra-fine filtration with magnetic filter) and oil separation. The BELKI Smart Unit cleans during operation, without interrupting the production.

1
BELKI Smart Unit - Back

T341-2560-003


Technical specifications for the BELKI Smart Unit

Type Item nummer Capacity (l/min) Filter surface (m²) Degree of filtration (nominal in µm) Acidity Temperature (°C) Connection (V/Hz) Material Power pump (kW) Power filter (kW) Weight (kg)
2,5.60 T341-2560-003 20-30 0,15 20-80 5-10 20-60 230/50 EN1.4301 0,25 0,12 275

Accessories for the BELKI Smart Unit

Suitable accessories for the BELKI Smart Unit are surface skimmers and bottom suction devices, various brackets and connection as well as a magnetic filter. The available variants are listed here.

Suitable accessories for the BELKI Smart Unit

 

 

 


Connection and installation of the BELKI Smart Unit

The BELKI Smart Unit is started up pushing two switches. One switch starts the self-priming pump, the other switch activates the integrated deep bed filter. The deep bed filter must be active for the pump to run. The hoses are connected using the standard Camlock coupling. This is quick, uncomplicated and self-explanatory. For low tanks, a bottom suction device is installed, which also fits into small access openings. A standard 230 V socket is sufficient for the electrical supply. The scope of delivery includes two hoses 3/4'' and one hose 1 1/4''. All hoses are 3 m long.

 

 

 

Your message has been sent successfully.

There was a problem validating the form. Please retry or contact the site administrator.

You must enter a valid e-mail address.
You must enter a message.